Locate all water pipes with the FG155C which controls the Stopper (water pulses), Striker (tapping) and 50 watt Locator Transmitter: 

• The Stopper locates water pipes made of all materials by creating water pulses on the pipes up to 220 psi then tracking the sound pulses with a Sewerin or others water leak detectors.

• The Striker locates all pipes 2” and smaller including water services by tapping on the pipe and tracking with a water leak detector.

• Remote control pauses and starts to Striker and Stopper. The strike intensity can also be adjusted with the remote control

• High Power Locator Transmitter:

  • Up to 50 watts of power in pulse mode, 25 watts continuous

  • 120V output for deeper and farther locates resulting fewer reconnection points.

  • 15 frequencies (5 custom), 512 hz, 640 hz, 1.1 Khz, 8.192 Khz, 9.995 Khz, 32.768 Khz, 41.66 Khz, 65.536 Khz, 83.078 Khz, 116.000 Khz

  • Induction at 9.95 Khz or 41.66 Khz

  • The Sewerin UT9200, UT9100 and UT930 utility locator receivers compliment the FG150 and FG150C.

Locate all water pipes with this water pulse or water pipe tapping device. For faster locates on metal pipe or pipes with tracer wires the FG155G sends a strong radio frequency for locating.

The Sewerin Stethophon 04, T10, A50, A150, A200 listen to the acoustic sounds created by the Stopper and Striker. The Sewerin A150 displays the maximum level at current and previous two listening points. The Sewerin A200 displays maximum for locating pipe or minimum for locating leaks for the current and previous seven listening points. In addition, the A200 digitally records the sound at each listening point to replay and compare with no delay between listening to pinpoint the pipes and leaks easier and more accurately.

The Sewerin UT9200, UT9100, UT930 match many of the frequencies of the FG150 other utility locators with same frequencies.